3D Print Make It Last: While You Can (2025)

1. Is it advisable not to run a print job at home overnight? - Prusa Forum

  • Aug 28, 2020 · Since overnight and unattended prints tend to be longer ones, they also tend to be larger ones, with good footprints, so the chance of the print ...

  • Hi, I am using i3 Mk3. Is it a bit dangerous to keep the print job running while asleep? I am going to bed in two hours and my print job will take 11 ...

2. How to Save a Warping 3D Print (mid Print!) : 3 Steps - Instructables

  • Shroud the printer to eliminated drafts, as well. Once a piece warps, pulling it back down with tape can only go so far to stem the problem. There are internal ...

  • How to Save a Warping 3D Print (mid Print!): There is nothing worse then being halfway through a 4 hour print and realising the print has started warping off of the build plate. This has happened many times before with ABS so instead of frustratingly hitting the kill button and restarting, I …

3. Failed 3D Prints, and How to Fix Them - Instructables

  • 3D printers work by building up objects layer by layer, and if the layers come off of the bed, you usually end up with plastic spaghetti instead of a clean ...

  • Failed 3D Prints, and How to Fix Them: 3D printers are seriously cool, but as of right now, they are new technology and pretty unreliable. I have a year of 3D printing experience, and I have tried and failed again and again trying to print various models on my printer. However, after fai…

4. How to improve your 3D prints with annealing - Original Prusa 3D Printers

5. How long will ABS last outside? - Improve your 3D prints

  • Sep 23, 2023 · UV light is also not the only enemy; 3d printed objects can have many nooks and crannies where moisture can build up and either create a nice ...

  • I know ABS is not UV resistant, but how long will it take for it to start turning bad when in sunlight for a few hours a day? I also have some tough PLA filament, cant find any information on UV resistance about that. Does anyone know? Thanks!

6. Keeping Your 3D Printer Filament Safe?

  • 3D printing filaments must be stored properly to make them last for a long time. Moisture and heat can make them unsuitable for printing, which is why you need ...

  • 3D printing filaments are very important for printing parts you want to create. Which is why, keeping them safe should be your first priority. Without the 3D printer filament, your 3D printed cannot work. It needs proper filaments to create the parts or pieces. And, if the filaments are damaged in some way or have lost their quality, it will affect the end results.Storing, and maintaining 3D filaments is very important for various reasons. Keeping them safe from elements will make them last long

7. GUIDE: Resuming a failed 3D print - CNC Kitchen

  • Jul 24, 2021 · If it's bigger, you need to make sure that there is enough clearance to not crash into the part. While you're homing, if in doubt, always have ...

  • I’m quite sure that almost anyone who owns a 3D printer already had a long print fail at some point just because no material somehow got extruded anymore. This is precisely what happened to me a bunch of weeks ago while filming my filament recycling video. I was easily able to continue mine with som

8. 3D Print Warping (PLA, PETG, ABS): 6 Simple Fixes - Wevolver

  • Apr 5, 2024 · Fans are built into some FDM 3D printers and ensure the build space does not get too hot. By tweaking fan speeds you can maintain closer control ...

  • Warping is typically caused by poor bed adhesion and inconsistent printing temperatures. Here’s how to fix the 3D printing problem.

9. How To: Smooth and Finish Your PLA Prints - Part 1 | MatterHackers

  • Aug 23, 2023 · Making your 3D prints look fresh off the assembly line isn't as hard as you think. Follow these simple techniques to finish your 3D prints ...

  • Making your 3D prints look fresh off the assembly line isn't as hard as you think. Follow these simple techniques to finish your 3D prints and make them shine.

10. Toybox Labs: Toybox 3D Printer

  • Can I print from my desktop or laptop? Yes. You can print directly from our website www.make.toys/toys. Just make sure you log in to the same account your ...

  • Welcome to the Toybox Store. Unleash your imagination with the new Toybox printer. Toybox is the first-of-its-kind 3D printer for kids. Be the first to receive your very own. Available today!

11. How to Prime and Paint 3D Printed Parts (With Video) - Formlabs

  • By mounting your 3D print on a dowel (often you can use a preexisting hole in the part), you can quickly maneuver while spraying, allowing you to get to all ...

  • Learn how to paint 3D printed models and achieve a glossy, smooth finish to transform your part from a simple 3D print into a professional product.

12. How Long Does PLA Last? Does It Expire? - MonoFilament DIRECT

  • For those of you wondering if you can 3D print miniatures for your fish tank, PLA is okay to use as it's aquarium-safe. It's also non-soluble, which means water ...

  • Need to know how long your PLA filament will last? In short, when you place PLA under normal room temperature, it can last for a very long time - say 12 to 18 years.

3D Print Make It Last: While You Can (2025)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Jeremiah Abshire

Last Updated:

Views: 5662

Rating: 4.3 / 5 (74 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Jeremiah Abshire

Birthday: 1993-09-14

Address: Apt. 425 92748 Jannie Centers, Port Nikitaville, VT 82110

Phone: +8096210939894

Job: Lead Healthcare Manager

Hobby: Watching movies, Watching movies, Knapping, LARPing, Coffee roasting, Lacemaking, Gaming

Introduction: My name is Jeremiah Abshire, I am a outstanding, kind, clever, hilarious, curious, hilarious, outstanding person who loves writing and wants to share my knowledge and understanding with you.